• Director's Viewfinder

    Includes:

    - Viewfinder uses 435 Ground Glass (please specify what ground glass is required when booking the finder)

  • Arri MkIV (FF-4) Follow Focus

    Includes:

    - Focus Whip
    - Right Knob
    - Crank Handle
    - 2 x Scales

  • Arri Mini Follow Focus (MFF-2)

    Includes:

    - Cine Style Hard Stop Follow Focus
    - Setup for 15mm Lightweight Rods
    - Single Side Follow Focus

  • Arri Clamp On Mattebox (LMB-15) 3 Stage

    Includes:

    - 3 × 4×5.65” Stages (PV)
    - Top Flap
    - 5 x Mattes
    - Can supply 4×4” Trays on Request

  • Arri Clamp On Mattebox (LMB-5) 2 Stage

    Includes:

    - 2 × 4×5.65” Stages (PV)
    - Top Flap
    - 5 x Mattes
    - Can Supply 4×4” Tray on Reques

  • Arri MB-20 Production Mattebox 3 Stage

    Includes:

    - 3 × 4×5.65” (PV) Rotating Stages
    - Top & Side Flap Set
    - 5 x Mattes

  • Arri MB-18 Production Mattebox 3 Stage

    Includes:

    - 3 × 4×5.65” (PV) Rotating Stages
    - Top & Side Flap Set
    - 5 x Mattes

  • Arri MB-28 Compact 6.6x6.6" Production Mattebox 3 Stage

    Includes:

    - 2 × 6.6×6.6” Rotating Stages
    - Top & Side Flap Set
    - 5 x Mattes

  • Arri MB-14 6.6x6.6" Production Mattebox

    Includes:

    - 2 × 6.6×6.6” Rotating Stages
    - Top & Side Flap Set
    - 5 x Mattes
    - Extra 2 × 6.6×6.6” Rotating Stage available for an additional fee

  • Arri WCU-4 Wireless Control System

    Includes:

    - Arri WCU-4 Hand Unit with Control License
    - 3x Sony NP FM500 Batteries
    - 1x Sony BC-QM1 Battery Charger
    - 2x White Marking Discs
    - 4x Premarked Focus Discs - 12", 14", 20" & 3'6"
    - 3x CForce Mini Motors with brackets (includes 15mm reduction bushings)
    - 1x 0.3m LBUS CForce Mini Motor Cable

  • Arri SXU-1 Focus Unit

    Includes:

    - Arri SXU-1 Focus Hand Unit
    - 3x White Marking Discs
    - 3x Sony NP FM500 Batteries
    - 1x Sony BC-QM1 Battery Charger
    - Arri AMC-1 Controller Unit
    - 1x CForce Mini Motor with bracket (includes 15mm reduction bushing)
    - 1x 0.3m LBUS CForce Mini Motor Cable

  • Cmotion Panbar Zoom Unit

    Includes:

    - CForce Mini Motor with bracket (includes 15mm reduction bushing)
    - 1x 1ft LBUS Cforce Mini Motor Cable

  • Preston F.I.Z HCU-3 System

    Includes:

    - HCU-3 Controller with Programmed Lens Mapping
    - Remote Focus, Iris & Zoom System
    - Alexa Remote Run Cable
    - RED Epic Remote Run Cable
    - Sony F5 Remote Run Cable
    - RED One MX Remote Run Cable
    - CineTape Interface Cable for Remote Focus Readout

    CineTape not included

  • CE Cinetape

    Includes:

    - Arri 3 Pin Cinetape Power Cable
    - RED 4 Pin Cinetape Power Cable
    - D-Tap Cinetape Power Cable
    - Cinetape Horns

  • Preston Focus Unit

    Includes:

    - Preston Remote Focus Unit with Preston Motor
    - Alexa Remote Run Cable
    - RED Epic Remote Run Cable
    - Sony F5 Remote Run Cable
    - RED One MX Remote Run Cable

  • BarTech Remote Focus System

    Includes:

    - BarTech Remote Focus with single Hayden Motor
    - Alexa Remote Run Cable
    - RED Epic Remote Run Cable
    - Sony F5/F55 Remote Run Cable
    - RED One MX Remote Run Cable

  • Microforce Zoom Control

    Includes:

    - Hayden Motor Unit
    - Oppenheimer Handle
    - Can power off 12v Block Battery or via D-Tap supply

  • Phantom Wireless Setup

    Includes:

    The Phantom Wireless Setup allows use of the Phantom Miro LC320S free from cabling. Included with the setup is the Phantom Remote Control Unit, Teradek Wireless Transmitter, Custom Built Shoulder Caddy and 4 x IDX Duo Batteries to run both the camera and accessories.

    We strongly recommend hire of the CineRoid EVF and an onboard monitor when using the wireless setup.

    Please note that a Phantom Technician will still be required on set with this setup to keep operation and filming running smoothly.